<optgroup id="vypap"><li id="vypap"><source id="vypap"></source></li></optgroup>
<optgroup id="vypap"></optgroup>
<mark id="vypap"></mark>
<optgroup id="vypap"><em id="vypap"><pre id="vypap"></pre></em></optgroup>
  • <samp id="vypap"></samp>
    1. <sub id="vypap"><sup id="vypap"></sup></sub>

      移民內參 新西蘭職業列表 CSSL坎特伯雷省緊缺職業清單

      CSSL坎特伯雷省緊缺職業清單

      發布時間:2017-09-04 復查時間:2019-08-12 8401

      內參暖貼:

      從2018年12月17日起,CSSL坎特伯雷省緊缺職業清單將被廢除,被CISSL基礎設施職業短缺列表所取代。

      CSSL坎特伯雷省緊缺職業清單并不針對技術移民申請類別,無法獲得技術移民額外加分。這份清單是移民局推出的一個臨時清單,旨在滿足坎特伯雷地區(Canterbury2010年和2011年地震災后重建工作的需要。對于坎特伯雷省尋求重建工作的技術工人,這份清單可以促進申請人臨時工作簽證得到優先批準。

      新西蘭緊缺職業清單分類 - immiknow

      為了緩解嚴重的用工短缺壓力,新西蘭勞工部根據勞動力市場的統計數據,定義了一個重要技能需求清單(Essential Skills in Demand Lists)。重要技能需求清單的針對對象為技術性工作者,適用范圍包括海外臨時簽證申請人、技術移民申請人。重要技能需求列表共包含三類:


      1. 長期緊缺職業清單(LTSSL, Long Term Skill Shortage List):滿足學歷、工作、注冊的要求,可獲得技術移民額外加分。
      2. 即時緊缺職業清單(ISSL, Immediate Skill Shortage List):為了滿足臨時工作簽證申請人的優先批準,不加分。
      3. 坎特伯雷省緊缺職業清單(CSSL, Canterbury Skill Shortage List):從2018年12月17日起此清單被廢除,由CSSL清單取代

      4. 基礎設施職業短缺列表(CISSL,Construction and Infrastructure Skill Shortage List:2018年12月17日起生效,為了滿足臨時工作簽證申請人的優先批準,申請新西蘭技術移民時不加分。

      坎特伯雷省緊缺職業清單 - immiknow

      Canterbury Skill Shortage List最后一次更新于2017年8月14日。 這次職業沒有發生變化,但是使用CSSL職業列表的標準發生了一些變化,特別是一些職業增加了對學歷的要求。


      職業組
      職業和代碼
      有雇主offer的雇主簽證申請人要求
      學歷必須等同于以下新西蘭學歷【注1】

      Construction

      Building Inspector / Building Surveyor (312113)

      One of the following qualifications:

      - A bachelor's degree at NZQF Level 7, or a higher qualification with the minimum equivalent of 360 credits, which includes the requirements of a New Zealand major in quantity surveying or construction economics

      - A Graduate Diploma at NZQF Level 7, or a higher qualification, which includes the knowledge requirements of a New Zealand Graduate Diploma in the focus areas of construction, construction management, or construction project management

      - A diploma at NZQF Level 6, or a higher qualification, with the minimum equivalent of 240 credits, which includes the credit and knowledge requirements of a New Zealand Diploma (Level 6) in the focus areas of building surveying, architectural technology, construction management, or quantity surveying

      AND a minimum of two years’ relevant post-qualification work experience

      Construction

      Construction Project Manager (Roading and Infrastructure) (133111)

      One of the following:

      - Bachelor of Engineering with Honours (Civil Engineering) (NZQF Level 8)

      - Bachelor of Engineering Technology (Civil Engineering) (NZQF Level 7)

      - Bachelor of Engineering Technology (Highways Engineering) (NZQF Level 7)

      - A bachelor's degree at NZQF Level 7, or a higher qualification with the minimum equivalent of 360 credits, which includes the requirements of a New Zealand major in the focus areas of construction management or highway engineering

      - A Graduate Diploma at NZQF Level 7, or a higher qualification which includes the knowledge requirements of a New Zealand Graduate Diploma in the focus areas of construction management, highway engineering or construction project management

      - A diploma at NZQF Level 6, or a higher qualification, with the minimum equivalent of 240 credits, which includes the knowledge requirements of a New Zealand Diploma in the focus areas of civil engineering, highway engineering or construction management

      - A Washington Accord or Sydney Accord accredited undergraduate (initial) engineering degree in Civil Engineering (listed - see Note 3)

      - A qualification at NZQF Level 7 or higher, with a letter from IPENZ certifying that the degree and any further learning meet the benchmark requirements towards Chartered Professional Engineer professional status in New Zealand

      - NZ registration in the field of civil engineering as a Chartered Professional Engineer or an Engineering Technologist by the Institution of Professional Engineers New Zealand

      AND a minimum of five years' relevant post-qualification work experience

      Construction

      Construction Project Manager (Foreman) (Roading and Infrastructure) (133111)

      A minimum of five years’ experience in building or maintaining roads AND
      staff management experience AND
      appropriate driver license

      Construction

      Project Builder (including Building Project Manager and Site Foreman) (133112)

      One of the following qualifications:

      - A bachelor's degree at NZQF Level 7, or a higher qualification with the minimum equivalent of 360 credits, which includes the requirements of a New Zealand major in quantity surveying or construction economics

      - A Graduate Diploma at NZQF Level 7, or a higher qualification, which includes the knowledge requirements of a New Zealand Graduate Diploma in the focus areas of construction, construction management or construction project management

      - A diploma at NZQF Level 6, or a higher qualification, with the minimum equivalent of 240 credits, which includes the knowledge requirements of a New Zealand Diploma (Level 6) in the focus areas of quantity surveying, construction economics, construction management or building

      AND a minimum of three years’ relevant post-qualification work experience

      Construction

      Surveying Technician (Spatial Science Technician/Land Surveyor's Technician) (312116)

      One of the following:

      - A New Zealand Bachelor of Surveying (NZQF Level 7)

      - A New Zealand Bachelor of Surveying with Honours (NZQF Level 8)

      - A diploma at NZQF Level 6, or a higher qualification, which includes the credit and knowledge requirements of the New Zealand Diploma in Surveying (Level 6)

      - Professional Associate Membership of the New Zealand Institute of Surveyors

      AND a minimum of two years’ relevant post–qualification work experience

      Construction

      Surveyor (232212)

      One of the following:
      - Bachelor of Surveying (NZQF Level 7)
      - Bachelor of Surveying with Honours (NZQF Level 8)
      - Registration as a Professional Surveyor with the New Zealand Institute of Surveyors
      - Professional Associate Membership of the New Zealand Institute of Surveyors (with an overseas degree approved by NZIS)

      Engineering

      Civil Engineer (233211),  Electrical
      Engineer (233311), Structural Engineer (233214)

      One of the following:
      - A Washington Accord accredited undergraduate (initial) engineering degree (listed - see Note 3)
      - A Bachelor of Engineering with Honours (NZQF Level 8)
      - A qualification at NZQF Level 7 or higher, with a letter from IPENZ certifying that the degree and any further learning meet the benchmark requirements towards Chartered Professional Engineer professional status in New Zealand
      - NZ registration as a Chartered Professional Engineer by the Institution of Professional Engineers New Zealand

      Engineering

      Civil Engineering Draughtsperson (312211),

      A diploma at NZQF Level 6, or a higher qualification, which includes the credit and knowledge requirements of the New Zealand Diploma in Engineering (Civil) (Level 6)
      Engineering Electrical Engineering Draughtsperson (312311) A diploma at NZQF Level 6, or a higher qualification, which includes the credit and knowledge requirements of the New Zealand Diploma in Engineering (Electrical) (Level 6)

      Engineering

      Civil Engineering Technician (312212)

      One of the following:

      - Bachelor of Engineering Technology (Civil Engineering) (NZQF Level 7)

      - A diploma at NZQF Level 6, or a higher qualification, with the minimum equivalent of 240 credits, which includes the knowledge requirements of the New Zealand Diploma in Engineering (Civil) (Level 6)

      - A Washington Accord or Sydney Accord accredited undergraduate (initial) engineering degree in Civil Engineering (listed - see Note 3)

      - A qualification at NZQF Level 7 or higher, with a letter from IPENZ certifying that the degree and any further learning meet the benchmark requirements towards Chartered Professional Engineer status in New Zealand

      - NZ registration in the field of Civil Engineering as a Chartered Professional Engineer or as an Engineering Technologist by the Institution of Professional Engineers New Zealand

      AND a minimum of three years’ work experience including a minimum of 12 months' relevant post-qualification work experience in the past 18 months

      Engineering

      Electrical Engineering Technician (312312)

      One of the following:

      - Bachelor's degree in Engineering with Honours (Electrical and Electronic Engineering) (NZQF Level 8)

      - Bachelor of Engineering Technology (Electrical Engineering) (NZQF Level 7)

      - Bachelor of Engineering Technology (Electrical and Electronic Engineering) (NZQF Level 7) - A Washington Accord or Sydney Accord accredited undergraduate (initial) engineering degree in Electrical Engineering (listed - see Note 3)

      - A qualification at NZQF Level 7 or higher, with a letter from IPENZ certifying that the degree and any further learning meet the benchmark requirements towards Chartered Professional Engineer professional status in New Zealand

      - NZ registration in the field of Electrical Engineering as a Chartered Professional Engineer or as an Engineering Technologist by the Institution of Professional Engineers New Zealand

      AND a minimum of three years’ relevant post-qualification work experience

      Telecommunications

      Telecommunications Engineer (263311)

      One of the following:

      - Bachelor of Engineering with Honours (Computer Engineering) or (Computer and Electronic Engineering) or (Computer Systems Engineering) or (Electronic Engineering) or (Electrical and Electronic Engineering) or (Electronics and Communication Engineering) or (Electronics and Computer Engineering) or (Electronic/s and Computer Systems Engineering) or (Network Engineering) (NZQF Level 8)

      - A Washington Accord or Sydney Accord accredited undergraduate (initial) engineering degree (listed - see note 3)

      - A qualification at NZQF Level 7 or higher, with a letter from IPENZ certifying that the degree and any further learning meet the benchmark requirements towards Chartered Professional Engineer professional status in New Zealand

      - NZ registration as a Chartered Professional Engineer or as an Engineering Technologist by the Institution of Professional Engineers New Zealand

      AND a minimum of three years' relevant post-qualification work experience

      Trades

      Airconditioning and Refrigeration Mechanic (342111)

      A certificate at NZQF Level 4, or a higher qualification, which includes the credit and knowledge requirements of the New Zealand Certificate in Refrigeration and Air Conditioning (Trade) (Level 4)

      AND at least 12 months' relevant work experience in New Zealand

      Trades

      Bricklayer (331111)

      A certificate at NZQF Level 4, or a higher qualification, which includes the credit and knowledge requirements of the Brick and Block Laying strand of the New Zealand Certificate in Trowel Trades (Level 4)

      OR a minimum of three years’ relevant work experience, including at least 12 months' relevant work experience in New Zealand

      AND Licensed Building Practitioner (LBP) licence to do Restricted Building Work (RBW) within the scope of the Bricklaying and Blocklaying Licence Class, EXCEPT IF the work will be done under the supervision of an appropriately LBP who is licensed to supervise RBW work done within the scope of a Bricklaying and Blocklaying Licence Class OR the duties of the Bricklayer will not include RBW

      Trades

      Carpenter (331212)

      A certificate at NZQF Level 4, or a higher qualification, which includes the credit and knowledge requirements of the New Zealand Certificate in Carpentry (Level 4)

      OR a minimum of three years’ relevant work experience, including at least 12 months' relevant work experience in New Zealand

      AND Licensed Building Practitioner (LBP) licence to do Restricted Building Work (RBW) within the scope of the Carpentry Licence Class, EXCEPT IF the work will be done under the supervision of an appropriately LBP who is licensed to supervise RBW work done within the scope of a Carpentry Licence Class OR the duties of the Carpenter will not include RBW

      Trades

      Carpenter and Joiner (331211)

      A certificate at NZQF Level 4, or a higher qualification, which includes the credit and knowledge requirements of the New Zealand Certificate in Carpentry (NZQF Level 4)

      AND

      A certificate at NZQF Level 4, or a higher qualification, which includes the credit and knowledge requirements of one strand of the New Zealand Certificate in Joinery (Level 4)

      OR

      a minimum of three years’ relevant work experience, including at least 12 months' relevant work experience in New Zealand

      AND

      Licensed Building Practitioner (LBP) licence to do Restricted Building Work (RBW) within the scope of the Carpentry Licence Class, EXCEPT IF the work will be done under the supervision of an appropriately LBP who is licensed to supervise RBW work done within the scope of a Carpentry Licence Class OR the duties of the Carpenter will not include RBW

      Trades

      Drainlayer (334113)

      Licensed or authorised as a Drainlayer (not including a limited certificate holder) by the Plumbers, Gasfitters and Drainlayers Board
      AND
      at least 12 months' relevant work experience in New Zealand

      Trades

      Electric Line Mechanic (342211)

      NZ registration as a line mechanic or a limited certificate as a line mechanic from the Electrical Workers Registration Board

      Trades

      Fibrous Plasterer (333211)

      A certificate at NZQF Level 4, or a higher qualification, which includes the credit and knowledge requirements of the Fibrous Plaster Installation strand of the New Zealand Certificate in Interior Linings Installation (Level 4)

      OR

      a minimum of three years’ relevant work experience, including at least 12 months' relevant work experience in New Zealand

      AND Licensed Building Practitioner (LBP) licence to do Restricted Building Work (RBW) within the scope of the External Plastering Licence Class, EXCEPT IF the work will be done under the supervision of an appropriately LBP who is licensed to supervise RBW work done within the scope of a External Plastering Licence Class OR the duties of the Fibrous Plasterer will not include RBW

      Trades

      Floor Finisher (332111)

      A certificate at NZQF Level 4, or a higher qualification, which includes the credit and knowledge requirements of one strand of the National Certificate in Flooring (Level 4)

      OR

      a minimum of three years relevant work experience, including at least 12 months' relevant work experience in New Zealand

      Trades

      Glazier (333111)

      A certificate at NZQF Level 4, or a higher qualification, which includes the credit and knowledge requirements of one strand of the New Zealand Certificate in Glazing (Level 4)

      OR a minimum of three years’ relevant work experience

      AND evidence that the work will be done under the supervision of an appropriately Licensed Building Practitioner (LBP) who is licensed to supervise relevant Restricted Building Work (RBW) OR that the duties of the Glazier will not include RBW

      Trades

      Joiner (331213)

      A certificate at NZQF Level 4, or a higher qualification, which includes the credit and knowledge requirements of one strand of the New Zealand Certificate in Joinery (Level 4)

      OR

      a minimum of three years’ relevant work experience, including at least 12 months' relevant work experience in New Zealand

      Trades

      Metal Fabricator (322311)

      A certificate at NZQF Level 4, or a higher qualification, which includes the credit and knowledge requirements of one strand of the New Zealand Certificate in Engineering Fabrication (Trade) (Level 4)

      OR a minimum of three years' relevant work experience

      Trades

      Plumber (General) (334111)

      Licensed or authorised as a Plumber (not including a limited certificate holder) by the Plumbers, Gasfitters and Drainlayers Board

      AND at least 12 months' relevant work experience in New Zealand

      Trades

      Roof Tiler (333311)

      A certificate at NZQF Level 4, or a higher qualification, which includes the credit and knowledge requirements of one strand of the New Zealand Certificate in Roofing (Installation) (Level 4)

      OR a minimum of three years’ relevant work experience, including at least 12 months' relevant work experience in New Zealand

      AND Licensed Building Practitioner (LBP) licence to do Restricted Building Work (RBW) within the scope of the Roofing Licence Class, EXCEPT IF the work will be done under the supervision of an appropriately LBP who is licensed to supervise RBW work done within the scope of a Roofing Licence Class OR the duties of the Roof Tiler will not include RBW

      Trades

      Scaffolder (821712)

      A certificate at NZQF Level 4, or a higher qualification, which includes the credit and knowledge requirements of the New Zealand Certificate in Scaffolding (Level 4)

      AND a minimum of two years' relevant post-qualification work experience

      Trades

      Solid Plasterer (333212)

      A certificate at NZQF Level 4, or a higher qualification, which includes the credit and knowledge requirements of the Solid Plastering strand of the New Zealand Certificate in Trowel Trades (Level 4)

      OR

      a minimum of three years’ relevant work experience, including at least 12 months' relevant work experience in New Zealand

      AND

      Licensed Building Practitioner (LBP) licence to do Restricted Building Work (RBW) within the scope of the External Plastering Licence Class, EXCEPT IF the work will be done under the supervision of an appropriately LBP who is licensed to supervise RBW work done within the scope of a External Plastering Licence Class OR the duties of the Solid Plasterer will not include RBW

      Trades

      Stonemason (331112)

      A certificate at NZQF Level 4, or a higher qualification, which includes the credit and knowledge requirements of one strand of the New Zealand Certificate in Stonemasonry (Level 4)

      OR a minimum of three years’ relevant work experience, including at least 12 months' relevant work experience in New Zealand

      Trades

      Wall and Floor Tiler (333411)

      A certificate at NZQF Level 4, or a higher qualification, which includes the credit and knowledge requirements of the Floor and Wall Tiling strand of the New Zealand Certificate in Trowel Trades (Level 4)

      OR a minimum of three years’ relevant work experience, including at least 12 months' relevant work experience in New Zealand

      Trades

      Welder (322313), Fitter-Welder (323213)

      A certificate at NZQF Level 4, or a higher qualification, which includes the credit and knowledge requirements of one strand of the New Zealand Certificate in Engineering Fabrication (Trade) (Level 4)

      OR a minimum of three years’ relevant work experience

      Transport

      Truck Driver (General) (733111)

      AND a minimum of three years’ experience driving heavy rigid (gross laden weight of more than 18,000kg) or heavy combination (gross combined weight of more than 25,000kg) vehicles, including at least 12 months' relevant work experience in New Zealand

      Note 1: Qualifications listed (unless an exception is stated) are New Zealand awarded qualifications on the New Zealand Qualifications Framework (NZQF). Overseas qualifications must be comparable to the standard of the New Zealand qualification listed. Overseas qualifications therefore require an International Qualification Assessment (IQA) from the New Zealand Qualifications Authority stating the comparable NZQF qualification.


      Note 2: Where post-qualification work experience is included as a requirement it applies to all qualifications listed for the occupation (unless otherwise indicated).


      Note 3: Where a Washington Accord accredited undergraduate engineering degree is a requirement, the engineering degree has to be awarded from or after the date the country became a signatory, and must be on the list of accredited programmes of the signatory country. To determine if an engineering degree awarded is Washington Accord accredited, please refer to the links from the International Engineering Alliance on their website: http://www.ieagreements.org/Washington-Accord/Accredited.cfm.

      Where a Sydney Accord accredited undergraduate engineering degree is a requirement, the engineering technology degree has to be awarded from or after the date the country became a signatory, and must be on the list of accredited programmes of the signatory country. To determine if an engineering technology degree awarded is Sydney Accord accredited, please refer to the links from the International Engineering Alliance on their website: http://www.ieagreements.org/Sydney/signatories.cfm.

      上一頁 CISSL建筑和基礎設施職業清單
      下一頁 ISSL新西蘭即時緊缺職業清單

      推薦閱讀

      Q1坎特伯雷省就業機會多嗎?工資比其他地區高嗎?

      地震后當地外來人口增長緩慢,當地留學生每年申請人數也是各省中占比最少的,就業競爭相對不那么激烈,工資相對也高。

      Q2如何確定CSSL清單上哪些職業是需要注冊的?

      http://www.y8328.com/nz/register/registered-occupation.html只有在此清單上的職業是需要做職業注冊的。

      Q3CSSL職業清單下次更新是什么時候?

      下次審查時間預計將在2018年年初(新西蘭移民局官網)。

      Q4CSSL職業清單多久更新一次?

      移民局會根據坎特伯雷地區的經濟發展情況以及當地勞動力市場需求定期對該職業 列表進行審查和更新。

      Q5CSSL職業清單上的職業是否適用于新西蘭全國?

      不是的。 只適用于坎特伯雷地區。

      Q6CSSL職業清單上的職業需要注冊嗎?

      如果從事的職業是新西蘭要求注冊的職業,則需要取得相關注冊機構的注冊資格。

      Q7職業在CSSL職業清單上,申請新西蘭工作簽證時用做學歷認證嗎?

      需要滿足ANZSCO清單上的要求,非新西蘭學歷或是非豁免情況,需要做NZQA學歷認證。

      Q8CSSL 職業清單與ANZSCO職業清單,LTSSL、ISSL職業清單有什么區別?

      LTSSL職業清單和ISSL職業清單上的職業是根據新西蘭本地勞動力市場需求情況從ANZSCO職業清單上選取出來的。LTSSL清單上列出的是長期緊缺職業,一般每1~2年做出一次修改;而ISSL清單上的職業會根據勞動力市場供需波動隨時做出調整,即該清單變動頻繁。

      而CSSL是新西蘭政府為了滿足坎特伯雷省災后重建,尋求重建技術工人而制定的。該職業清單上的職業可能會出現在LTSSL清單和/或是ISSL清單上。

      Q9如果職業是在CSSL職業列表上,對新西蘭本地雇主有什么要求?

      如果是CSSL職業列表上的職業,則新西蘭雇主不需要通過勞動力市場評估(即無需證明經過努力招聘不到新西蘭當地人)。

      Q10職業在CSSL職業列表上,能否獲得新西蘭技術移民加分?

      不能,CSSL職業列表上的職業只適用于申請臨時工作簽證。但是如果該職業清單上的職業同時出現在新西蘭LTSSL職業列表上,則申請者滿足條件可申請新西蘭技術移民。

      我要提問

      我要提問

      掃描二維碼

      每周舉辦線上交流活動

      他們的問題,也許正是你關注的

      移民內參
      小浮窗
      婷婷我去也